CLEVIS PINS |
|
CLEVIS PINS
Material - Plain - Zinc - Stainless Steel
Diameter - 3/16" and Up
Length - 1/2" and Up
|
|
UNIVERSAL CLEVIS PINS |
|
UNIVERSAL CLEVIS PINS
Material - Plain - Zinc - Stainless Steel
Diameter - 3/16" and Up
Length - 1" and Up
|
|
COTTER PINS |
| COTTER PINS
Material - Plain - Zinc - Stainless Steel
Diameter - 1/32" and Up
Length - 1/2" and Up |
|
HAIR PIN COTTER |
|
HAIR PIN COTTER (HITCH PIN)
Material - Plain - Zinc - Stainless Steel
Diameter - 1/32" and Up
Length - 17/16" and Up
|
|
 DOWEL PINS |
| DOWEL PIN
Material - Plain - Zinc - Stainless Steel
Diameter - 1/16" and Up
Length - 3/16" and Up |
|
 ROLL PINS |
| ROLL PIN (SPRING PIN)
Material - Plain - Zinc - Stainless Steel
Diameter - 1/16" and Up
Length - 3/16" and Up |
|
 TAPER PINS |
| TAPER PINS
Material - Plain - Zinc
Diameter - 1" and Up
Length - 5/8" and Up |
|
RINGS |
EXTERNAL INTERNAL |
|
RETAINING RINGS
External: A ring-shaped stamping with one opening on the circumference. The two ends at the opening are called lugs and flare out slightly allowing for easier installation onto shafts.
Internal: A ring-shaped stamping with one opening on the circumference. The two ends at the opening are called lugs and flare slightly into the groove. When the lugs are released, contact is made with the grooved housing.
Material:
Steel: Carbon spring steel SAE 1060-1090
Stainless: Precipitation Hardened Alloy 15% Chromium, 7% Nickel, 2% Molybdenum |
|
E-RINGS |
| E-RINGS
A semi-circulr stamping with two ends which are set further apart than both internal and external rings. The two ends have flared "prongs" which are substantially wider than the other parts of the ring. A center prong extends from the inside perimeter of the ring, halfway between the two ends. The three prongs, when radially installed, make contact with the bottom of the groove.
Material:
Steel: Carbon spring steel SAE 1060-1090
Stainless: Precipitation Hardened Alloy 15% Chromium, 7% Nickel, 2% Molybdenum |
|
O-RINGS |
|
BUNA-O-RINGS
Buna-N-Viton-Other Material Standard & Specialty Sizes Available |
|
| * If you do not see your requirement list. Please contact us! |
